Capacitive fuel level sensors

EPSILON fuel level sensor is designed for precision (with accuracy <99%) measuring the level of fuel in reservoirs and vehicle fuel tanks. The sensor can be used in fuel management systems (control of fuel discharges and fuel refills) and in satellite vehicle monitoring systems (GPS/GLONASS) of different manufacturers.

 

Unique differences from the sensors of other manufacturers:

  • More precise measurement of fuel level due to a higher resolution sensor`s level and the best characteristics of linear measuring scale;
  • Tech modular design (measuring head is mounted and dismantled independently of the fuel probe, which allows easy and quick to change, if necessary, the measuring head without re-calibration of the tank);
  • The ability to use short-measuring probes (for flat tank depth of less than 30 cm);
  • Light weight (300 g) and simple installation.

 

Capacitive fuel level sensor EPSILON EN is intended to measure the fuel level in the vehicles tanks. Sensor keeps all the functions of EPSILON ES sensor alongside with new functions. In the EPSILON EN there are modifications with digital RS-232, RS-485, frequency, analog (with FV-1x converter) inputs.  

Main advantages of the EPSILON EN sensor:

  • Modular construction.
  • Measuring head is mounted and dismantled independently of the fuel probe that allows easily and quickly to change, if necessary, the measuring head without re-calibration of the tank;
  • Presence of the inclinometer. Designed to provide information about tilt angle of the vehicle. Inclinometer allows to get information about validity of measurement and to perform correction and compensation using 3D model of the tank;
  • Built-in concentrator. Possibility to plug in multiple sensors with digital interfaces and to determine the total fuel level in several tanks of the vehicle;
  • The measuring part is isolated galvanically;
  • Explosion-proof type 1ExsiallCT6 X;
  • Wide range of possible probe length. The sensor with the length of 770mm can be cut down up to 30mm;
  • Non-standard length up to 3000mm; Supports a version of the absolute linear scale and a version of the relative measurement of the capacity of the tank (the measurement with only two extreme points of calibration);
  • Remote update of the configuration parameters and firmware;
  • The possibility to choose a “string in tube” or “tube in tube” construction.

 

Fuel level sensor Epsilon EZCan be used for control of both petrol and diesel fuel level in any fuel tanks and in any vehicles including big fuel tanks and mobile fuellers. EPSILON EZ with an external low-voltage blast barrier has level of explosion proofness of 0 EX ia IIB T6 that guarantees safe operation of the sensor which is in an explosive environment.

 

 

 

 

 

  

Sensor is purposed for fuel level measurement in containers and fuel tanks of vehicles. Sensor can be used with equipment that supports unified communication protocol Epsilon Data Exchange. Sensor has the electronic galvanic isolation through interface and power-supply circuits. Fuel level measurement is provided by a measuring head together with the probe submerged in fuel, which acts as a condenser, which capacity linearly depends on a fuel level in a tank.

EPSILON® ESx-H digital RS-232, RS-485 capacitive fuel level sensor is designed to measure fuel level in vehicle tanks and reservoirs with high precision (99% accuracy).

Main advantages:

  • High-resolution of the sensor, linearity, temperature stability;
  • Calibration table inside the sensor head. Allows transferring data directly in liters;
  • Galvanic isolation. Protects sensor head from power surges;
  • Monolith construction;
  • Wide range of possible probe length from 15 to 300 cm;
  • Ease of installation. Any hack saw can be used to cut the probe.

 

The ER-BLE sensor is designed to measure the level of fuel in tanks and fuel tanks of vehicles, as well as in stationary fuel storage facilities, when wiring is not possible or too time-consuming.

The ER-BLE sensor can also be used to measure the level of other non-conductive liquids.

The measuring head of the sensor performs a linear conversion of the capacitance of the measuring probe into a digital fuel level code, processing of the received digital data with averaging of measurement results, measuring the temperature of the head and data output via the wireless BLE interface.

Main advantages:

  • High-resolution of the sensor, linearity, temperature stability;
  • Calibration table inside the sensor head. Allows transferring data directly in liters;
  • Up to 5 years of battery life;
  • Monolith construction;
  • Wide range of possible probe length from 15 to 300 cm;
  • Ease of installation. Any hack saw can be used to cut the probe.

 

Contact details

Address

Novozabarskaya Str. 2/6

Kiev, Ukraine 04074

Email Address

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.

Phone Number

+38 093 887 46 26

Quick Contact