The Epsilon-ER2-BLE wireless fuel level sensor is designed to measure the level of contents in reservoirs and fuel tanks of
vehicles (hereinafter referred to as the “vehicle”) and stationary fuel storage facilities.
The Epsilon-ER2-BLE can be used to measure the level of other non-conductive liquids. It can be used together with an external data acquisition unit (GPS monitoring
equipment) that supports BLE technology (“Bluetooth Low Energy” – Bluetooth specification with ultra-low power consumption).
Main advantages:
- High-resolution of the sensor, linearity, temperature stability;
- Calibration table inside the sensor head. Allows transferring data directly in liters;
- Up to 7 years of battery life;
- Monolith construction;
- Wide range of possible probe length from 15 to 300 cm;
- Ease of installation. Any hack saw can be used to cut the probe.
The EPSILON ES fuel level sensor is designed for high-precision fuel measurement (accuracy better than 99%) in reservoirs and vehicle fuel tanks. It can be integrated into fuel management systems (for monitoring fuel drains and refills) as well as GPS-based vehicle tracking systems from various manufacturers.
Key advantages over other manufacturers’ sensors:
- Higher measurement accuracy thanks to increased sensor resolution and superior linear scale characteristics.
- Modular design – the measuring head can be mounted or removed independently of the fuel probe, allowing quick replacement without the need to recalibrate the tank.
- Short probe compatibility – can be used with tanks less than 30 cm deep.
- Lightweight and easy installation – weighs only 300 g and requires minimal setup effort.
Sensor is purposed for fuel level measurement in containers and fuel tanks of vehicles. Sensor can be used with equipment that supports unified communication protocol Epsilon Data Exchange. Sensor has the electronic galvanic isolation through interface and power-supply circuits. Fuel level measurement is provided by a measuring head together with the probe submerged in fuel, which acts as a condenser, which capacity linearly depends on a fuel level in a tank.
EPSILON® ESx-H digital RS-232, RS-485 capacitive fuel level sensor is designed to measure fuel level in vehicle tanks and reservoirs with high precision (99% accuracy).
Main advantages:
- High-resolution of the sensor, linearity, temperature stability;
- Calibration table inside the sensor head. Allows transferring data directly in liters;
- Galvanic isolation. Protects sensor head from power surges;
- Monolith construction;
- Wide range of possible probe length from 15 to 300 cm;
- Ease of installation. Any hack saw can be used to cut the probe.
SIGMA ULS non-invasive ultrasonic level sensor. Can be used to measure level of liquids in reservoirs, including LPG in the vehicles tanks. Sensor is fastened to the bottom of the tank and do not have direct contact with the liquid. The device allows us to measure level of water, LPG (propane-butane) and other fluids. Sensor is compatible with various control units, data concentrators and GPS tracking equipment.
Key features:
- Low cost;
- Non-invasive;
- Easy installation;
- Measuring error 2%.
The sensor is used for continuous non-invasive, digital, automatic measurement of LPG level and other liquids such as water, chemicals.
Sigma ULB measures the level mainly in aboveground stationary cylindrical metal tanks from 10 cm up to 4 meters depending of the liquid density.
The sensor has measurement error from 5% up to 1 mm depending on the model. Can be installed in the 0 explosive zone.
UDS ultrasonic sensor is designed to measure distances to objects. Specially used in monitoring systems for agricultural work control. The sensor send ultrasonic waves and receives reflected signal back. Convertor, build in the sensor, performs calculation of the distance to the object.
Key features:
• Ultrasonic;
• Dust proof IP68 design;
• Standard fuel level sensor protocol;
• Easy installation;
• Measuring error 1%.
The RFID Card Reader is used to identify driver staff by reading the ID codes of RFID cards. The identifier allows you to control the actuator (electronic lock, valve, etc.) using the built-in key element if the current card code and the code in the internal card database match.
The reader can be used both as a part of the RFID system and as a separate device. Can be easily connected/integrated with 3rd part GPS devices.
Supported interfaces: RS-232, RS-485, 1-Wire
Working standards: EM-Marin 125 kHz, ISO14443A (MIFARE) 13,56 MHz
Digital fuel level indicator is installed on the dashboard of your vehicle and designed for permanent visual control of fuel volume in the tank by the driver. Digital fuel level indicator is connected to digital fuel level sensor, and indicates measured level via RS-232 or RS-485 digital interfaces. The device can operate both in passive mode (along with GPS tracking device which reads data from fuel level sensor) and in active mode, sending requests to sensor independently. Sensor has “filling” mode, which allows to control volume of fuel, filled in vehicle tank. Indicators weight does not exceed 90g.
A digital temperature and humidity sensor with RS-485 or RS-232 interface, designed for use in refrigerator temperature control systems. The sensor requires no calibration during installation.
Its hermetically sealed design ensures resistance to aggressive detergents commonly used for refrigerator disinfection.
Measurement accuracy: ±0.5 °C.
Wireless identification of trailing equipment and attached implements by the wireless identifier is intended to monitor remote equipment.
It can be used with agricultural machinery and automotive transport. Special reader is used to receive ID-codes of the identifier.
Can be connected to any GPS tracking device.